搭建 frp 内网穿透服务

wget https://raw.githubusercontent.com/MvsCode/frps-onekey/master/install-frps.sh -O ./install-frps.sh
chmod 700 ./install-frps.sh
./install-frps.sh install

# [common] is integral section
[common]
# A literal address or host name for IPv6 must be enclosed
# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
# For single "bind_addr" field, no need square brackets, like "bind_addr = ::".
bind_addr = 0.0.0.0
bind_port = 7000

# udp port to help make udp hole to penetrate nat
bind_udp_port = 7001

# udp port used for kcp protocol, it can be same with 'bind_port'.
# if not set, kcp is disabled in frps.
kcp_bind_port = 7000

# udp port used for quic protocol.
# if not set, quic is disabled in frps.
# quic_bind_port = 7002
# quic protocol options
# quic_keepalive_period = 10
# quic_max_idle_timeout = 30
# quic_max_incoming_streams = 100000

# specify which address proxy will listen for, default value is same with bind_addr
# proxy_bind_addr = 127.0.0.1

# if you want to support virtual host, you must set the http port for listening (optional)
# Note: http port and https port can be same with bind_port
vhost_http_port = 80
vhost_https_port = 443

# response header timeout(seconds) for vhost http server, default is 60s
# vhost_http_timeout = 60

# tcpmux_httpconnect_port specifies the port that the server listens for TCP
# HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
# requests on one single port. If it's not - it will listen on this value for
# HTTP CONNECT requests. By default, this value is 0.
# tcpmux_httpconnect_port = 1337

# If tcpmux_passthrough is true, frps won't do any update on traffic.
# tcpmux_passthrough = false

# set dashboard_addr and dashboard_port to view dashboard of frps
# dashboard_addr's default value is same with bind_addr
# dashboard is available only if dashboard_port is set
# 管理面板
dashboard_addr = 0.0.0.0
dashboard_port = 7500

# dashboard user and passwd for basic auth protect
dashboard_user = admin
dashboard_pwd = admin

# dashboard TLS mode
dashboard_tls_mode = false
# dashboard_tls_cert_file = server.crt
# dashboard_tls_key_file = server.key

# enable_prometheus will export prometheus metrics on {dashboard_addr}:{dashboard_port} in /metrics api.
enable_prometheus = true

# dashboard assets directory(only for debug mode)
# assets_dir = ./static

# console or real logFile path like ./frps.log
log_file = ./frps.log

# trace, debug, info, warn, error
log_level = info

log_max_days = 3

# disable log colors when log_file is console, default is false
disable_log_color = false

# DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true.
detailed_errors_to_client = true

# authentication_method specifies what authentication method to use authenticate frpc with frps.
# If "token" is specified - token will be read into login message.
# If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token".
authentication_method = token

# authenticate_heartbeats specifies whether to include authentication token in heartbeats sent to frps. By default, this value is false.
authenticate_heartbeats = false

# AuthenticateNewWorkConns specifies whether to include authentication token in new work connections sent to frps. By default, this value is false.
authenticate_new_work_conns = false

# auth token
token = 12345678

# oidc_issuer specifies the issuer to verify OIDC tokens with.
# By default, this value is "".
oidc_issuer =

# oidc_audience specifies the audience OIDC tokens should contain when validated.
# By default, this value is "".
oidc_audience =

# oidc_skip_expiry_check specifies whether to skip checking if the OIDC token is expired.
# By default, this value is false.
oidc_skip_expiry_check = false

# oidc_skip_issuer_check specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer.
# By default, this value is false.
oidc_skip_issuer_check = false

# heartbeat configure, it's not recommended to modify the default value
# the default value of heartbeat_timeout is 90. Set negative value to disable it.
# heartbeat_timeout = 90

# user_conn_timeout configure, it's not recommended to modify the default value
# the default value of user_conn_timeout is 10
# user_conn_timeout = 10

# only allow frpc to bind ports you list, if you set nothing, there won't be any limit
allow_ports = 2000-3000,3001,3003,4000-50000

# pool_count in each proxy will change to max_pool_count if they exceed the maximum value
max_pool_count = 5

# max ports can be used for each client, default value is 0 means no limit
max_ports_per_client = 0

# tls_only specifies whether to only accept TLS-encrypted connections. By default, the value is false.
tls_only = false

# tls_cert_file = server.crt
# tls_key_file = server.key
# tls_trusted_ca_file = ca.crt

# if subdomain_host is not empty, you can set subdomain when type is http or https in frpc's configure file
# when subdomain is test, the host used by routing is test.frps.com
subdomain_host = frps.com

# if tcp stream multiplexing is used, default is true
# tcp_mux = true

# specify keep alive interval for tcp mux.
# only valid if tcp_mux is true.
# tcp_mux_keepalive_interval = 60

# tcp_keepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps.
# If negative, keep-alive probes are disabled.
# tcp_keepalive = 7200

# custom 404 page for HTTP requests
# custom_404_page = /path/to/404.html

# specify udp packet size, unit is byte. If not set, the default value is 1500.
# This parameter should be same between client and server.
# It affects the udp and sudp proxy.
udp_packet_size = 1500

# Enable golang pprof handlers in dashboard listener.
# Dashboard port must be set first
pprof_enable = false

[plugin.user-manager]
addr = 127.0.0.1:9000
path = /handler
ops = Login

[plugin.port-manager]
addr = 127.0.0.1:9001
path = /handler
ops = NewProxy

[common]
server_addr = 服务端公网IP #服务端bind_addr
server_port = 7000 #服务端bind_port
token = 服务端auth_token

[服务名字]
# 远程访问端口
remote_port = 8888
type = tcp
local_ip = 192.168.1.9
local_port = 8888

[服务名字]
# 远程访问端口
remote_port = 8889
type = tcp
local_ip = 192.168.1.77
local_port = 8889